Optical Systems Design OSD2524, Руководство пользователя

Страница: 201 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 201
Configuration
→
VCL
→
Protocol-based VLAN
→
Protocol to Group
This page allows you to map a Group Name (already configured or to be configured in the
future) to a VLAN for the switch.
The displayed settings are:
Delete
To delete a Group Name to VLAN mapping, check this box. The entry will be deleted from the switch
during the next Save.
Group Name
A valid Group Name is a string, at the most 16 characters long, which consists of a combination of
alphabets (a-z or A-Z) and integers(0-9) with no special characters allowed. You may either use a Group
that already includes one or more protocols (see Protocol to Group mappings), or create a Group to
VLAN ID mapping that will become active the moment you add one or more protocols inside that Group.
Furthermore, the Group to VLAN ID mapping is not unique, as long as the port lists of these mappings
are mutually exclusive (e.g. Group1 can be mapped to VID 1 on port#1 and to VID 2 on port#2).
VLAN ID
Indicates the VLAN ID to which the Group Name will be mapped. A valid VLAN ID ranges from 1 to
4095.
Port Members
A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping. To include
a port in the mapping, check the box. To remove or exclude the port from the mapping, make sure the box
is unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a new Group to VLAN mapping entry
Click to add a new entry in the mapping table. An empty row is added to the table and the
Group Name, VLAN ID and port members can be configured as needed. Legal values for a VLAN ID are
1
through
4095
.
The button can be used to undo the addition of new entry. The maximum possible Group to
VLAN mappings are limited to 256.
Buttons