Optical Systems Design OSD2524, Руководство пользователя, Страница: 21 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 21
4.2 INSTALLATION
ELECTROMAGNETIC COMPATIBILITY
WARNING : This is a Class A product . In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
OPTICAL OUTPUT OPERATION
WARNING : Laser Safety: Class 1 Laser Product (SFP) per IEC 60825-1:2014 standard.
Class 1
The OSD2524 is a Class 1 laser product.
PRECAUTIONS
▲
All service personnel should be provided training as to the hazards of direct viewing of laser radiation and
of the precautionary measures during servicing of equipment
▲
Areas where laser products are installed should be restricted in access to trained service personnel only
and appropriate warning signs posted in the work area.
▲
All laser apertures should be covered by protective covers when not connected to optical fibers. Never
leave outputs uncovered.
▲
Laser equipment should be positioned above or below eye level where possible. Apertures should be
positioned away from personnel.
▲
Protective eyewear should be worn in the vicinity of laser equipment.