Optical Systems Design OSD2524, Руководство пользователя

Страница: 172 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 172
This page allows the user to inspect and configure the current SyncE port settings.
CLOCK SOURCE NOMINATION AND STATE
For each possible clock source the following can be configured.
Clock Source
This is the instance number of the clock source. This has to be referenced when selecting 'Manual' Mode
Nominated
When a clock source is nominated, the clock output from the related PHY (Port) is enabled against the
clock controller. This makes it available as a possible source in the clock selection process. If it is
supported by the actual HW configuration, The Station clock input can be nominated as a Clock Source.
Port
In this drop down box, the ports that are possible to select for this clock source, is presented. The PCB104
Synce module supports 10MHz station clock input. The station clock input is indicated by a port name =