Optical Systems Design OSD2524, Руководство пользователя

Страница: 37 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 37
•
Daylight Saving Time - This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration. Select 'Disable' to disable the
Daylight Saving Time configuration. Select 'Recurring' and configure the Daylight Saving Time duration
to repeat the configuration every year. Select 'Non-Recurring' and configure the Daylight Saving Time
duration for single time configuration. ( Default : Disabled )
Recurring Configurations
Start time settings
•
Week - Select the starting week number.
•
Day - Select the starting day.
•
Month - Select the starting month.
•
Hours - Select the starting hour.
•
Minutes - Select the starting minute.
End time settings
•
Week - Select the ending week number.
•
Day - Select the ending day.
•
Month - Select the ending month.
•
Hours - Select the ending hour.
•
Minutes - Select the ending minute.
Offset settings
•
Offset - Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to 1440 )
Non Recurring Configurations
Start time settings
•
Month - Select the starting month.
•
Date - Select the starting date.
•
Year - Select the starting year.
•
Hours - Select the starting hour.
•
Minutes - Select the starting minute.
End time settings
•
Month - Select the ending month.
•
Date - Select the ending date.
•
Year - Select the ending year.
•
Hours - Select the ending hour.
•
Minutes - Select the ending minute.
Offset settings