Optical Systems Design OSD2524, Руководство пользователя

Страница: 49 / 402

OPTICAL SYSTEMS DESIGN
DOC ID: 10120001
OSD2524 OPERATOR MANUAL
PAGE 49
This page displays current port configurations. Ports can also be configured here.
Port
This is the logical port number for this row.
Description
The description of the port. It is an ASCII string no longer than 256 characters.
Link
The current link state is displayed graphically. Green indicates the link is up and red that it is down.
Current Link Speed
Provides the current link speed of the port.
Configured Link Speed
Selects any available link speed for the given switch port. Only speeds supported by the specific port is
shown. Possible speeds are:
Disabled
- Disables the switch port operation.
Auto
- Port auto negotiating speed with the link partner and selects the highest speed that is compatible
with the link partner.
10Mbps HDX
- Forces the cu port in 10Mbps half duplex mode.
10Mbps FDX
- Forces the cu port in 10Mbps full duplex mode.
100Mbps HDX
- Forces the cu port in 100Mbps half duplex mode.
100Mbps FDX
- Forces the cu port in 100Mbps full duplex mode.
1Gbps FDX
- Forces the port in 1Gbps full duplex
2.5Gbps FDX
- Forces the Serdes port in 2.5Gbps full duplex mode.
SFP_Auto_AMS
- Automatically determines the speed of the SFP. Note: There is no standardized way
to do SFP auto detect, so here it is done by reading the SFP rom. Due to the missing standardized way of
doing SFP auto detect some SFPs might not be detectable. The port is set in AMS mode. Cu port is set in
Auto mode.
100-FX
- SFP port in 100-FX speed. Cu port disabled.
1000-X
- SFP port in 1000-X speed. Cu port disabled.
Ports in AMS mode with 1000-X speed has Cu port preferred.
Ports in AMS mode with 1000-X speed has fiber port preferred.