- 2 -
OPTEX CO., LTD. (JAPAN)
(ISO 9001 Certified)
(ISO 14001 Certified)
5-8-2 Ogoto Otsu
Shiga 520-00
JAPAN
TEL:+8-77-579-8670
FAX:+8-77-579-890
URL:http://www.optex.co.jp/e/
OPTEX INCORPORATED (USA)
TEL:+-909-993-5770
Tech:(800)966-7839
URL:http://www.optexamerica.com
OPTEX (EUROPE) LTD. (UK)
TEL:+44-628-63000
URL:http://www.optexeurope.com
OPTEX SECURITY SAS (FRANCE)
TEL:+33-437-55-50-50
URL:http://www.optex-security.com
OPTEX SECURITY Sp.z o.o. (POLAND)
TEL:+48-22-598-06-55
URL:http://www.optex.com.pl
8- SPECIFICATIONS OF THE MAIN UNIT
Model
RLS-3060
Detection method
Infrared Laser Scan
Laser protection
class
Class
Wavelength of laser
emission
905 nm (infrared laser)
Coverage for vertical
mounting
Radius: 30 m (Approx. 00 ft.), Arc: 90°
Coverage for
horizontal mounting
MAX. 60 m (Approx. 200 ft.)
Detection resolution
0.25°
Power input
24V AC/DC ± 0%
Power consumption
400 mA (24VDC) 600 mA (24VAC)
Vertical mounting
height
5 m (Approx. 50 ft.) max
Horizontal mounting
height
0.7 m (28 in.) (recommended)
Indicator
A2 alarm
Red LED
A alarm
B alarm
B2 alarm
Status
Yellow LED
Power
Green LED
Area alarm output
N.O. 28V DC, 0.2A × 4outputs
Master alarm output
Form C, 28V DC, 0.2A max.
Trouble output
Form C, 28V DC, 0.2A max.
Tamper output
N.C. 28V DC, 0.A max.
Environmental
disqualification
circuit
Form C, 28V DC, 0.2A max.
Alarm period
Approx. 2 sec. Off delay timer
Warm-up period
Approx. 30 sec.
Operating
temperature
-20 – +60 °C (-4 – +40 °F)
IP rating
IP65
Dimensions
(H × W × D)
334 × 44 × 55 mm
(3.2 × 5.7 × 6. in.)
Weight
3 kg (06 oz.)
Accessories
Mounting screw, anchor bolt for board,
paper template, waterproof plug and
Installation Instructions
* Specifications and design are subject to change without prior
notice.
8-2 DIMENSIONAL DRAWING
8-3 OPTIONS
OPM-WT : Audio Walk Tester
RLS-PB : Pole mount bracket
RLS-SB : Adjustable angle mounting bracket
SPECIFICATIONS
8
7-3 SYSTEM FUNCTION AFTER POWER FAILURE
H Manual H Auto
H2 Manual H2 Auto
V Auto
Even if the power is shut down during the security protection
process (detection area is specified) due to reasons including
power failure, the specified detection area is saved on this
product. After power is restored, the product resumes intruder
detection normally in the detection area that was specified prior
to the power failure.
44
(5.7)
55
(6.)
64
(2.5)
8
(0.7)
334 (3.2)
35 (5.3)
92 (3.6)
07 (4.3)
Unit:mm (inch)
