Oprema Juice Premix-Postmix, Инструкция по установке и обслуживанию

Страница: 26 / 36

<page nr>
EN
GENERAL INFORMATION
26
TRANSPORT AND STORAGE
To avoid damage of the cooling unit, it is important to handle with care during loading and
unloading. Crane can be used for unit movement only if unit is on pallet.
- DO NOT turn around the unit
- DO NOT shake the unit or complete packing
AMBIENT CONDITIONS FOR INSTALLATION
Cooling unit has to be installed in the place where it is protected from rain, water sparkles, on
place with temperature correspondent to its climate class (marked on label Technical data); in
case this terms are not assured you lose warranty and malfunctions in performance are
possible.
Possible climate classes are:
SN – temperature of environment from 10°C to 32°C
N – temperature of environment from 16°C to 32°C
ST – temperature of environment from 18°C to 38°C
T – temperature of environment from 18°C to 43°C
When cooling unit is unpacked, it is necessary to check whether it is in proper condition
(visually undamaged ). In case of any doubt on damage of cooling unit within packaging, do
not install and use the unit. During packing postponement we ask you to respect local
legislation about packing postponement. Do not incinerate packing parts or throw them to
the environment. Packing of this cooling unit can be recycled in total. Keep packing material
away from children.
3217
PACKING POSTPONEMENT
PROCEDURE IN CASE OF MALFUNCTION
Most of technical issues can be easily solved by simple procedures. In this purpose we ask you
to read instructions carefully before informing service people or manufacturer. In case you
cannot solve the problem by using instructions from this manual, please contact the seller
from which the unit was bought. Keep units in good condition and do not allow any
modification on it, except if they are approved by the manufacturer.
Unit has to be stored in adjusted and clean space, with temperature between 0-40°C.. Do not
store coolers one on the other, and take care to set them in vertical position like as marked on
packaging.
This type of cooling units has to be used for dispensing drink only for open containers and for
immediate usage (glasses, bottles). Dispensed product has to be used immediately: you
cannot keep it or store in bottles. Any other use is considered as not appropriate and with this
potentially dangerous for health of consument. Producer of cooling units disclaims any
responsibility for damage occurred during inappropriate use of this dispensing unit.
DISPENSING PROCEDURE
During dispensing use open containers only