Oprema Juice Premix-Postmix, Инструкция по установке и обслуживанию

Страница: 31 / 36

31
EN
Cooling Parameters
These parameters include the temperature setting for the cooling of the block and the
chamber as well as chamber defrost settings (deactivation function is off if the value is set
period or duration parameter set to 0min.).
Keyboard and display when setting parameters:
P & -> 8 s input to program mode
P> 10 s Rinse cycle
+> 8-sec. Dispensing permission - on/off
(Pressing and holding the + key directly changes the parameter. It would equally be that we
change that parameter in the programming mode)
Dispensing permission:
Enabled: The buttons are bright white and it is possible to highlight.
Disabled: The buttons are not bright and it is not possible to highlight, the button flashes
every 10 seconds seconds blue.
Brix test:
The control dispensing lasts for 5 seconds, water or juice are dispensed (water + syrup). By
comparing the volume of beverage dispensed in sequence of 5 second determine ratio of
ingrediens.
PROGRAMMING
Default settings
Tblok 4°C
diff Tblok 1°C
Tkomora 6°C
diff Tkomora 2°C
portioning OFF
auto_clean OFF
defrost time 15 min
defrost_period 240 min