Oprema Juice Premix-Postmix, Инструкция по установке и обслуживанию

Страница: 33 / 36

33
CLEANING AND MAINTENANCE OF THE SYSTEM
Daily cleaning:
1. Clean the inner and outer surfaces with a damp cloth.
2. Clean the dispensing tubes with the cleaning brush.
3. Dip the brush into the water and clean the outlet tube.
4. Clean the drip tray.
5. The drip tray is made of stainless steel and can be fitted
in the dishwasher.
Cleaning and maintenance of the system
The cleaning and maintenance of the system is divided into:
1. Daily cleaning
2. Periodic cleaning
Periodic cleaning
1. Disconnect tube from the bag in box out of the opening.
2. Fill the bottle with hot water and rinse fluid and connect it to the connection.
3. Close the door of the machine and place the glass under the outlet tubes. Clean the
outlet pipes by pressing the corresponding button.
4. Clean the outlet tubes with a cleaning brush
5. Wet the brush in the water and put it in the outlet tube from the inside of the door.
6. Put back the bag in box and connect them.
EN
To perform servicing and repair on R290 systems, the service engineers must be trained to
handle flammable substances. This includes knowledge of tools, work with compressor and
refrigeration unit, basic legal regulations that are applicable, and precautions taken when
performing service and repair.
For the sake of your safety and in accordance with applicable legal regulations, all repairs must
be carried out by authorized persons such as electronic tile replacement and replacement of
illumination lamps
Service and repair
Device Sanitation:
The device is sanitized by an expertly trained person. Sanitation is performed because of the
hygienic correctness and quality of the correct beverage. The dynamics of sanitation is
determined by the beverage manufacturer. It is recommended that this be at least once in 3
months. Before disinfecting the unit, carefully read the instructions given by the disinfectant
manufacturer and make sure that all protective equipment (gloves, masks, etc.) is properly
used. Make sure the rooms are well ventilated. Some components of the device may be
damaged during the aggressive cleaning process. The manufacturer shall be liable for any
liability for damages caused by the use of aggressive and / or toxic agents.