M E D I A F I L E P L A Y B A C K
43
MEDIA FILE PLAYBACK
In addition to playing standard disc-based formats such as Blu-ray Disc, DVD, CD and SACD, the OPPO
BDP-95EU Blu-ray Disc Player can play media files. You can enjoy digital music, movies and photos stored
on an optical disc (recordable CD or DVD), a USB (Universal Serial Bus) drive, or an e-SATA (external
Serial ATA) drive. Due to the variation of media, encoding software and techniques used, compatibility
cannot be guaranteed for all user-created or downloaded contents. Support for such contents is on a best
effort basis.
Playback from a USB or e-SATA Drive
The OPPO BDP-95EU Blu-ray Disc Player is equipped with two USB ports (one on the front panel and the
other on the back) and one e-SATA port on the back. You may use the USB port to plug in a USB drive, or
the e-SATA port to plug in an e-SATA drive.
The USB ports are rated to provide a maximum of 5 V, 1000 mA power to the USB drive. It is sufficient for
USB thumb drives and flash memory card readers, but may not be sufficient for USB hard disks. It is
recommended to check with your drive manufacturer for power requirement, or use an external power
supply.
For the e-SATA port, you need to use an e-SATA drive with an external power supply.
The e-SATA port on BDP-95EU does NOT support “hot-plug”. To avoid any damage to your drive and the
port, please always plug in or unplug the drive when the player is turned off.
NOTE
•
This unit supports “USB Mass Storage Class Bulk-Only Transport” devices only. Most USB
thumbs drives, portable hard disk drives and card readers conform to this device class. Other
USB devices such as MP3 players, digital cameras, and mobile phones may not be compatible.
•
Supported USB drives can be formatted with the FAT (File Allocation Table), FAT32 or NTFS
(New Technology File System) file system.
•
In some cases, an incompatible USB/e-SATA device may cause the player to stop responding.
If this occurs simply turn off the power, remove the USB device, and turn the player back on.
•
The player accesses the USB drive in read-only mode. In order to minimize the risk of data
corruption, it is recommended that you only unplug the USB device when playback is completely
stopped.
•
DO NOT attempt to plug in a USB connector to the e-SATA port, or plug in an e-SATA
connector to the USB port(s). This might damage both your drive and the port(s).