I N S T A L L A T I O N
18
Connecting to a Stereo Audio System through XLR Balanced Cable
Method 9 – Stereo Analog Audio Connection by Balanced cables
You can also connect the BALANCED STEREO AUDIO OUT to your stereo audio system. Three-pin (XLR3)
cables are needed, and the XLR terminals on the player are male type.
NOTE
••••
Balanced audio connectors are used mostly in professional audio electronics, such as high quality
microphones and inter-equipment connections. BDP-95EU utilizes the 3-pin XLR connector (shown
below), which transmits a pair of differential signals (positive/ negative). The amplifier extracts the
voltage difference between differential signals, thus the common noise can be rejected and the
signal integrity is improved.
••••
In some audio systems the positions of “hot” (positive) and “cold” (negative) pins are switched. In this
case please set “
XLR Terminal Polarity
” to “
Inversion
” in the Audio Processing of Setup Menu.
