S E T U P M E N U O P T I O N S
72
2.
Dynamic Range Control
: To set the Dynamic Range Compression (DRC). DRC can smooth out the
sonic peaks and valleys common with wide-range digital audio. Enabling DRC may make low level
audio more audible during low-level listening. Turning off DRC restores the sonic energy present in the
original recording. The available options are:
•
Auto
– Play at the dynamic range specified by the disc. This option applies to Blu-ray Discs
only. For other disc types no dynamic range compression is applied.
•
On
– Turn on dynamic range compression.
•
Off
– Turn off dynamic range compression.
.
3.
XLR Terminal Polarity
: To set the polarity of the BALANCED STEREO AUDIO OUT terminals on
BDP-95EU. Please compare the positions of “hot” (positive) and “cold” (negative) pins on BDP-95EU
terminals (shown in the page 18) with those on your audio system. The available options are:
•
Normal
– The XLR three-pin positions on your audio system are the same as those on BDP-95EU
terminals.
•
Inversion
– The positions of “hot” (positive) and “cold” (negative) pins on your audio system are
switched comparing with those on BDP-95EU terminals.
NOTE
The Dynamic Range Compression is applied on the analog audio output, it also works on the digital
audio output (HDMI, Coaxial and Optical) when the audio format is set to PCM.
