Opex AS7200 Скачать руководство пользователя страница 66

Страница: 66 / 84

Statistics

AS7200 User Manual - OPEX Corporation use only - not for distribution

- Time - set the start and end time for the report. In Figure 25, these

parameters were set to include the 3rd shift (12:00 AM-8:00 AM) and the
first shift (8:00 AM to 4:00 PM).

- Job/Operator Lists - select one of the radio buttons:

URRENT JOBS

OPERATORS

- To use the job names and operators currently

stored in the Controller’s memory (as shown in the Jobs and Operators
lists).

EAD THRU PREVIOUS RUNS

- To find runs deleted from the current list of

jobs and operators. For example, if a job file was deleted from the Job
Name frame, it is still stored in the stats file. You can access it by
selecting this radio button, then clicking the

EFILL

button.

In the Summary section, select one of the radio buttons:

- to generate a statistics report for every job run that matches the

selected criteria

OBS

- to generate a statistics report sorted by job name(s)

PERATORS

- to generate a statistics report sorted by Operator name(s)

- Check the box to exclude jobs run by the OPEX Technician in your

report.

Click the Test

ATCHING

UNS

button to see how many jobs have been run

that match the criteria selected above. If

N/A

appears to the right of the

button, then there are no jobs to report that match the criteria listed.

- If a number appears after the

ATCHING

UNS

button, clicking

will

generate a statistics report for the selected criteria.

Содержание AS7200





















































































Результаты поиска

Содержание AS7200

Отзывы:

Opex AS7200, Руководство пользователя, Страница: 66 / 84

Результаты поиска

Содержание AS7200

Отзывы: