Opex AS7200 Скачать руководство пользователя страница 43

Страница: 43 / 84

Operating the System

AS7200 User Manual - OPEX Corporation

To mark a document as void, highlight the document’s thumbnail and press

OID

TEM

to void only the selected document, or

OID

RANSACTION

to void the

selected document and all other documents that are part of the transaction.
The VOID stamp will appear over the image and the document will be
designated as void in the batch file. Press

OID

TEM

to remove the VOID

stamp.

Figure 15: Voiding documents

Starting a new batch

There are three ways to start a new batch:

• Press the

ATCH

button while the job is running to begin a new batch

with the next scanned document.

• Press the

LOSE

ATCH

button, then scan the new batch ticket or the first

document of the new batch.

• Scan a batch ticket. If the New Batch Mode parameter is set to Auto,

scanning a batch ticket will start a new batch.

Note:

The

ATCH

button will only be available if activated for the current

job.

Содержание AS7200





















































































Результаты поиска

Содержание AS7200

Отзывы:

Opex AS7200, Руководство пользователя, Страница: 43 / 84

Результаты поиска

Содержание AS7200

Отзывы: