Open Labs Miko LXD, Руководство по эксплуатации

Страница: 3 / 211

Using the MiKo LXD safely
Before using the MiKo LXD, it is extremely important that you thoroughly read the following
instructions. This will provide you with the information needed for safe operation of your MiKo LXD.
Please continue reading the rest of this manual for specific information on the use of this unit.
Warning
To avoid permanent health damage, always adhere to these important safety advies:
•
The MiKo LXD, in combination with headphones or speakers, is capable of producing sound levels
that can cause permanent hearing loss. Do not submit your ears to long periods of high
volumes. If you experience any hearing loss or ringing in the ears, you should consult an
audiologist.
•
Do not open the MiKo LXD or attempt to disassemble or modify the internal parts without prior
guidance and/or instructions from an Open Labs Technician. If the Miko LXD does not seem to
function properly, contact Open Labs technical support.
Caution
To ensure that the MiKo LXD or any device connected to it is not damaged during usage or
maintenance, it is important to adhere to the following instructions.
•
Do not expose the MiKo LXD to inclement weather conditions such as heavy rain, or use the unit
in damp or wet conditions. It is unwise to place open containers of liquids near the unit, these
could spill onto the unit. Do not allow any objects or liquids to penetrate the unit.
•
Never use or store the MiKo LXD in conditions that are subject to extreme temperatures. This
mostly includes closed in environments where lots of heat and direct sunlight are present
(example, enclosed vehicle).
•
Do not place the MiKo LXD in unsuitable locations where the chance of falling could happen.
•
Before connecting the MiKo LXD to other electronic components, turn off the power for all
components. Before turning the power on or off for all components, set all volume levels to
minimum. Gradually raise the volume control while playing the Miko LXD to set the desired
listening level.
•
Before moving the MiKo LXD, disconnect all cables.
•
Be careful not to exert too much pressure on the knobs, faders, or touchscreen,.
•
When cleaning the MiKo LXD:
▪
Use a soft, dry cloth.
▪
To clean the touchscreen, use a lint free cloth or soft paper towel, with a small amount of
light window cleaner sprayed onto the cloth or paper towel.
•
Do not use paint thinners, solvents, cleaning fluids, or chemical based wiping cloths.
Open Labs MiKo LXD Production Station Manual
3