Open Labs Miko LXD, Руководство по эксплуатации

Страница: 16 / 211

Clip Indicator : The clip indicator will light up if your input signal from the XLR (Mic) or ¼” (line)
r18dBu (0dBfs). At this level, your mic preamp/line trim signal may not exhibit signs of
clipping such as distortion. However, this level will cause the A/D (analog to digital) converters to
clip. Therefore, it is highly recommended that you do not allow your converters to clip (the clip
indicators to light up) as the sound quality will not be desirable.
Main Level: This knob allows control over the output level. It has a range of -80db to +10dB.
Headphone ¼” Jack : This is where you connect your headphones.
Phones Knob: The phones knob controls the amount of volume going to the headphone output on
the front of the unit. Notice the volume indicator goes to 11 (loud). Use this setting with caution .
Red-Blue Power/Sync Light : This light is a clock (sync) indicator. It lets you know if your unit is
receiving wordclock correctly. Wordclock is the manner by which digital devices sync frame rates.
Proper wordclock sync prevents digital devices from having pops, clicks, or distortion in the audio
signal (due to mismatched digital audio transmission).
•
Blue – solid sync
•
Red – sync not present.
•
Flashing Red and Blue – external sync not present
Please note:
1. Open Labs production stations have cooling vents on the back panel and on the underneath
the chassis. Make sure that none of these vents are obstructed.
2. There should be ample room on the left side of your Open Labs production stations to allow
for the DVD/CD-ROM tray to eject without obstruction.
Connecting the Cables
Open Labs production stations contain all the common interfaces you would find on a computer
workstation. On the back panel you will find two USB ports, one VGA-monitor port, Ethernet port
(10/1000), Firewire 400, PS/2 keyboard, the audio I/O connectors, MIDI I/O and pedal inputs.
Before powering the Open Labs production station:
Connect the system to an uninterrupted power supply. The MiKo LXD has an auto voltage
switching powersupply.
Open Labs MiKo LXD Production Station Manual
16