Open Labs Miko LXD, Руководство по эксплуатации

Страница: 15 / 211

Rear Panel I/O:
See the end of this chapter for examples of connections to the various inputs and outputs.
Front Panel Audio Interface
There is also an audio interface located on the front of Open Labs production station, providing two
more audio inputs and an output for headphones.
The two inputs on this panel serve as preamps for either microphones or instruments (as opposed
to the rear panel inputs, which are appropriate for line-level signals). Phantom power may be
turned on for use with condensor mics.
Both of the inputs utilize the Neutrik Combo connector, which lets you use either 1/4” phone or
XLR connectors.
The 1/4” connectors are for use with an instrument (guitar, bass, etc.). When an instrument is
plugged into the instrument input, the microphone preamplifier is bypassed and the interface
becomes an active instrument preamplifier.
Note : Active instruments are those that have an internal preamp or a line level output. Active
instruments should be plugged into a line input (located on the back) rather than into an
instrument input. In other words, don’t plug an active instrument into the combo jacks on
channels 1 or 2.
48-volt Phantom Power
Pressing this button will send phantom power to the mic inputs. When on, the button will light up.
Input Gain Control
Each channel has an input gain control knob and associated clip light. The following gain structure
is provided for each channel:
Microphone Input XLR : 45dB of variable gain (+14dB to +55dB)
Instrument HiZ Input TS 1/4” : 45dB variable gain (+8dB to +50dB)
Open Labs MiKo LXD Production Station Manual
15