On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
133
This will copy the selected output to the
On Manual Control
list, which lists all outputs available for manual
control when viewing live video from the camera in question.
Good to know:
•
You are not limited to selecting output connected to the camera itself. If output has been defined on
other cameras/devices on the NetDVR system, this output will also be selectable in the
All Outputs
list.
•
An unlimited number of outputs may be selected this way.
•
If you have specified several outputs in the
On Manual Control
list, you are able to control the
sequence in which the outputs will be displayed in NetGuard and NetGuard-EVS. By using the
up
and
down
buttons located to the right of the list, you can change a selected output's position in the
sequence.
•
The
Output Settings for [Device Name] [Camera Name]
window also lets you select output for
automatic triggering on detected motion. This is further described in
8. When ready, click the
Output Settings for [Device Name] [Camera Name]
window's
Exit
button to return to
the
Camera Settings for [Device Name] [Camera Name]
window.
9. In
the
Camera Settings for [Device Name] [Camera Name]
window, click
OK
to return to the
Administrator
window.
10. Close the
Administrator
.
The defined output will now be available in NetGuard/NetGuard-EVS, as described in the beginning of this
text.
Note that individual users' rights may prevent them from accessing specific cameras and/or output in
NetGuard and NetGuard-EVS; such rights are defined through the
.
