On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
123
Note:
Your motion detection settings for the camera in question will entirely determine when motion is detected, and
thus when the VMD event will occur. See the description of the
for more information.
Also note that in order not to generate an excessively high number of VMD events during periods with lots of motion,
a VMD event cannot occur more frequently than every five seconds.
To add a VMD event, do the following:
1. In
, click the
I/O Setup
button.
This will open the
.
2. In
the
I/O Setup
window, first select the device on which motion must be detected in order for the event to
occur, then click the
Add VMD Event (Motion Detection)
button:
This will automatically add a VMD event to the selected device (unless the selected device is a video
encoder, see below).
o
If the selected device is a video encoder, several cameras may be attached to the device, and a
separate dialog will prompt you to select the required camera:
When ready, click
OK
.
3. In
the
I/O Setup
window, your newly defined VMD event will now be listed (you may have to click the expand
icon in front of the name of the device to see the listing):
