On-Net Surveillance Systems, Inc.
NetDVR 6.5
Administration
120
•
Sensor connected through
: Select the camera/device input port on which the input unit is connected.
Some cameras/devices only have a single input port; in that case simply select
Input 1
.
•
Event occurs when input goes
: Select whether the input event should be triggered when the signal on
the input sensor rises (
High
) or falls (
Low
).
•
External event name
: Specify a name for the event. Note that event names must
not
contain the
following characters: < > & ' " \ / : * ? | [ ]
•
(Optional) If requiring an e-mail alert to be sent automatically when the event occurs, select the
Send e-mail if this event occurs
check box. Note that in order to be able to use e-mail alerts, the e-
mail alert feature must have been set up in the
. If requiring an image
(recorded at the time of the event) to be included in the e-mail alert, also check the
Include image
from camera
check box and select the required camera in the list next to the check box.
•
(Optional) If requiring an SMS mobile phone text message alert to be sent automatically when the
event occurs, select the
Send SMS if this event occurs
check box. Note that in order to be able to
use SMS alerts, the SMS alert feature must have been set up in the
.
When ready, click
OK.
This will return you to the
I/O Setup
window.
4. In
the
I/O Setup
window, your newly defined event is now listed (you may have to click the expand icon in
front of the name of the camera or other device to see the listing):
Click
OK
to close the
I/O setup
window and return to the
Administrator
window.
For system administrators defining actions to be triggered by events, the event will now be selectable in line
with other events defined on NetDVR.
