Installation
8
Sinergy S II Series Series UPS User Instruction Manual
Tower (Floor)
Mounting and
External Battery
Cabinets
The UPS and external battery are designed to be floor standing as an alternative to rack mounting.
ATTENTION:
Use all supplied mounting hardware on each UPS and external battery.
Please use only the supplied fasteners to attach the supplied mounting brackets to the UPS or external
battery. Each UPS and External Battery Cabinet requires four (4) screws provided.
After mechanical installation is complete follow the instructions in the section titled “Connections” on
page 9 to connect your UPS and external battery.
Mounting the Tower UPS Only
1. Assemble the two sets of feet included with the UPS,
Fig. 3: Tower Feet
2. Place the UPS between feet as shown in Figure 4.
Fig. 4: UPS Tower Set Up
Mounting the Tower UPS Plus One External Battery
1. Assemble the two sets of feet with the spacer provided as shown in Figure 5.
Fig. 5: UPS Feet with Spacer
2. Place feet under UPS and external battery, see Figure 6.
Fig. 6: UPS Tower with Battery Set Up
3. Secure UPS and battery with bracket and screws provided.
Содержание S07KXAU
Страница 3: ......
