6
301 Fulling Mill Road, Suite G ©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA 17057
www.onqlegrand.com
(800)-321-2343
B. Logging on to the Router/Switch
1.
With your PC connected to one of the local ports on the Router/Switch and its front panel
routing switch in the “On” position, open a browser and enter the Router/Switch’s default IP
address (192.168.40.254), and click “
Go
” (see
Figure 4
) to get the login page.
2. To logon, enter “admin” for the user name and password and just click
OK
(see
Figure 5
).
3.
Figure 6
shows the System Status screen that you will see once you have logged on. By
clicking on the word WIZARD in the upper left corner (below our logo), the Setup Wizard will
lead you step-by-step through the initial configuration of the Router.
NOTE: You can also manually configure the Router/Switch by clicking on a function listed
across the top of the page, such as “SYSTEM” to change your User Name or Password,
perform a firmware upgrade, restore factory defaults, or backup/restore system settings.
You could also click on “WAN” to configure your network connection type, or “LAN” to
identify the starting IP address for the LAN ports, or “NAT” or “FIREWALL” or “DDNS” to
configure those functions.
Figure 4
Figure 5
192.168.40.254
admin
*****