8
301 Fulling Mill Road, Suite G ©Copyright 2006 by On-Q/Legrand, Inc All Rights Reserved.
Middletown, PA 17057
www.onqlegrand.com
(800)-321-2343
Notice that the wizard starts with Host Settings where you can specify a host name, domain
name, time zone and even Daylight Savings time functionality. Once you are done, click on the
“Next” button at the lower right and you will be shown the WAN Settings screen represented by
Figure 8
. This is where you select the type of network service to which the router is being
attached. Examples for Cable modems and DSL modems are shown below.
1. Cable Modem Setup
By clicking on “Cable Modem” you will be shown the screen represented by
Figure 9
. Notice
that if you made a mistake, and actually meant to select a different network type, you can
click on the Back button.
NOTE: If required due to restrictions by your local cable provider, the Cable Modem
WAN Settings screen also allows you to configure MAC Cloning, where you decide
what MAC (hardware) address is given to the ISP when they interogate your home
network. That allows you to run multiple PCs behind your router without having to
identify each one to the ISP, as the ISP may want to charge you access for each PC.
Figure 8
Figure 9