Advanced Settings
58
N150 Wireless ADSL2+ Modem Router N150RM
To set up a static route:
1.
Select
Advanced > Static Routes
, and click
Add
to display the following screen:
2.
In the Route Name field, type a name for this static route (for identification purposes only.)
3.
Select the
Private
check box if you want to limit access to the LAN only. If Private is
selected, the static route is not reported in RIP.
4.
Select the
Active
check box to make this route effective.
5.
Type the IP address of the final destination.
6.
Type the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255
.
7.
Type the gateway IP address, which has to be a modem router on the same LAN segment
as the N150RM modem router.
8.
Type a number from 1 through 15 as the metric value.
This value represents the number of modem routers between your network and the
destination. Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9.
Click
Apply
to add the static route.
