![background image](http://html1.mh-extra.com/html/omron/zen-soft01-v4-12-2008/zen-soft01-v4-12-2008_operation-manual_744252077.webp)
59
Clearing the ZEN Memory
Section 4-4
Note
Refer to
6-2 Program Check Errors and Warnings
for information
on any error messages that appear during setting or removal of
program protection.
4-4
Clearing the ZEN Memory
This section describes how to clear the ZEN memory from the ZEN
Support Software. The ZEN must be connected and online to perform
this operation.
1,2,3...
1.
Select
ZEN(Z)/All Clear within ZEN
from the Menu Bar.
2.
Click the
OK
Button to clear all memory in the ZEN. Click the
Cancel
Button to cancel the all clear operation.
ZEN memory data
Status after memory cleared
Ladder programs
(including parameter
settings information)
Ladder program code is completely cleared. No
ladder programming will remain.
Password settings
The password will be cleared and program
protection removed.
I/O bits
All inputs will be reset (turned OFF) and holding
timer and counter present values cleared to 0.
Z184-E1-04.book Page 59 Thursday, November 20, 2008 4:25 PM
Содержание ZEN-SOFT01-V4 - 12-2008
