![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448028.webp)
7
.
EtherCAT
Connection Procedure
25
7.4.2. Checking the Data that are Sent and Received
Confirm that the correct data are sent and received.
Sufficiently confirm safety before you change the values of variables on a Watch
Tab Page when the Sysmac Studio is online with the CPU Unit.
The devices that are connected to output units may operate regardless of the
operating mode of the Controller.
The Destination Device will run if you proceed to this section. Confirm safety
before operation. If you cannot confirm safety, do not proceed to this section
after completing until
Section 7.4.1
.
If you proceed to this section, make sure to complete all the steps and place the
Destination Device in the safe state.
1
Select
Watch Tab Pag
e from the
View Menu.
2
The Watch1 Tab Page is displayed
in the lower section of the Edit
Pane.
3
Enter the following names in the
Watch1 Tab Page for monitoring.
Click a column under the
Name
Column to enter a new name.
M1_Output_s_Channel_1_Data_
7000_01
M2_Output_s_Channel_1_Data_
7000_01
4
Click
TRUE
in the
Modify
Column of
M1_Output_s_Channel_1_Data_70
00_01
.
The Online value of
M1_Output_s_Channel_1_Data_70
00_01
changes to True.
Содержание WAGO-I/O-SYSTEM
Страница 32: ...2014 0414 P594 E1 01...