![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448024.webp)
7
.
EtherCAT
Connection Procedure
21
7.3.4. Transferring the Project Data
Transfer the project data from the Sysmac Studio to the Controller.
Always confirm safety at the Destination Device before you transfer a user
program, configuration data, setup data, device variables, or values in memory
used for CJ-series Units from the Sysmac Studio.
The devices or machines may perform unexpected operation regardless of the
operating mode of the CPU Unit.
After you transfer the user program, the CPU Unit restarts and communications
with the EtherCAT slaves are cut off. During that period, the slave outputs
behave according to the slave settings. The time that communications are cut off
depends on the EtherCAT network configuration.
Before you transfer the user program, confirm that it will not adversely affect the
device.
1
Select
Check All Programs
from the Project Menu.
2
The Build Tab Page is displayed
on the Edit Pane.
Confirm that "0 Errors" and "0
Warnings" are displayed.
3
Select
Rebuild Controller
from
the Project Menu.
4
A confirmation dialog box on the
right is displayed. Confirm that
there is no problem and click the
Yes
Button.
Содержание WAGO-I/O-SYSTEM
Страница 32: ...2014 0414 P594 E1 01...