![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448015.webp)
7
.
EtherCAT
Connection Procedure
12
4
The Connect to Controller
Dialog Box is displayed.
Select the
Direct connection via
USB
Option for Connection
type.
Uncheck both of the
Upload the
project
Check Box and the
Display the Troubleshooting
Dialog Box
Check Box of
Operation after Connection.
Click the
Connect
Button.
5
A confirmation dialog box on the
right is displayed. Check the
contents and click the
OK
Button.
* The displayed dialog depends
on the status of the Controller
used. Check the contents and
click the
Yes
or
OK
Button to
proceed with the processing.
6
A confirmation dialog box is
displayed. Check the contents
and click the
OK
Button.
7
The Auto Connect Project
Dialog Box is displayed online.
When an online connection is
established, a yellow bar is
displayed on the Pane.
The left pane is called Multiview
Explorer, the top right pane is
called Toolbox, the bottom right
pane is called Status Monitor
Plane, and the middle pane is
called Edit Pane.
Additional Information
For details on online connections to a Controller, refer to
Section 5 Online Connections to a
Controller
of the
Sysmac Studio Version 1 Operation Manual
(Cat. No. W504).
Status
Monitor
Plane
Multiview
Explorer
Edit Pane
Toolbox
Содержание WAGO-I/O-SYSTEM
Страница 32: ...2014 0414 P594 E1 01...