![background image](http://html1.mh-extra.com/html/omron/wago-i-o-system/wago-i-o-system_connection-manual_1633448014.webp)
7
.
EtherCAT
Connection Procedure
11
7.3. Setting Up the Controller
Set up the Controller.
7.3.1. Starting the Sysmac Studio and Installing the ESI File
Install the ESI file for the WAGO-I/O-SYSTEM Fieldbus Coupler in the Sysmac Studio.
Install the Sysmac Studio and USB driver in the Personal computer beforehand.
1
Connect the Ethernet cable to
the built-in EtherCAT port
(PORT2) of the Controller and
connect the USB cable to the
peripheral (USB) port.
As shown in
5.2. Device
Configuration
, connect the
Personal computer,
WAGO-I/O-SYSTEM Fieldbus
Coupler, and Controller.
2
Turn ON the power supply to the
Controller and the System
supply and the Field supply to
the WAGO-I/O-SYSTEM
Fieldbus Coupler.
3
Start the Sysmac Studio.
Click the
Connect to Controller
Button.
* If a confirmation dialog for an
access right is displayed at
start, select to start.
USB cable
End Cover
Power Supply Unit
Ethernet
cable
CPU Unit
Controller
Содержание WAGO-I/O-SYSTEM
Страница 32: ...2014 0414 P594 E1 01...