![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403103.webp)
6-3
Refer to "5-10 Termination Code List" also.
♦
♦
♦
♦
Host communication error
♦
♦
♦
♦
Communication error
♦
♦
♦
♦
System error
Error Code
Name
Check Points
"10"
Parity error
• Checking the setting about conditions of communication with a host device.
→
Refer to Sections 5-9-7 and 5-9-9.
• Wiring of RS-232C, RS-422A and RS-485 (Example: Terminating resis-
tance and influence of ambient noise)
→
Refer to Sections 4-2, 4-3 and 6-3.
"11"
Framing error
"12"
Overrun error
"13"
BCC error
• How to calculate BCC
→
Refer to Section 5-3.
• Wiring of RS-232C, RS-422A and RS-485 (Example: Terminating resis-
tance and influence of ambient noise)
→
Refer to Sections 4-2, 4-3 and 6-3.
"14"
Format error
• Format of command (Example: Applicable characters and position of STX/ETX)
→
Refer to Sections 5-7 to 5-9.
"18"
Frame length error
Error Code
Name
Check Points
"70"
Communication error
• Distance between an antenna and tag, and tag movement speed.
• Wiring of FG, power cable, etc. (Influence of ambient noise)
• Noise environment around antenna. (FG ground of devices, shield and loca-
tion change)
→
Refer to Sections 4-2, 4-3 and 6-3.
"71"
Verification error
• Noise environment around antenna. (FG ground of devices, shield and loca-
tion change)
→
Refer to Sections 4-2, 4-3 and 6-3.
"72"
No existence error
• Distance between an antenna and tag, and tag movement speed.
"7A"
Address error
• Designation of address/number of bytes of executed command.
• Tag memory capacity and applicable address range.
→
Refer to Section 5-7.
"7B"
Battery voltage low
• Traffic, ambient temperature and battery life.
→
Section 2-2-6.
"7D"
Write Protect error
• Setting of Write Protect information.
→
Section 3-6.
• Designation of address/number of bytes of executed command.
→
Refer to Section 5-7.
Error Code
Name
Description
"92"
Antenna failure
• Antenna indicator.
→
Section 6-2.
"93"
Tag memory error
• Take out of the communication area, return to the area again and check the
termination code.
If the same error occurs, replace a tag with a new one.
6-3 Error List