![background image](http://html1.mh-extra.com/html/omron/v690-series/v690-series_user-manual_741403025.webp)
2-10
Item
Specifications
Frequency
2450 MHz band (microwave, 2434.25 - 2465.75 MHz)
Type of radio station
Specified low-power radio station - radio equipment for mobile object identification (RCR
STD-29 Version 3.0)
* A user is not required to apply a license for radio station.
Transmission output at
modulation
5 mW for 2 m mode and 10 mW for 5 m mode.
Polarized wave
Circularly polarized wave
Communication range
2 m mode/5 m mode switched by a host command. (Section 3-2)
2 m mode: 0.2 to 2.0 m (Reference value)
5 m mode: 0.2 to 5.0 m (Reference value)
* Conditions for reference value
• Ambient temperature 20±5
°
C
• Place the tag at a suitable rotating position so that the logo "omron" can become upright.
(Refer to the figure below.)
• On a medial axis of antenna placed at 1.5 m high in a large room where radio wave noise
is minimized.
Transmission speed
600 kbps
Communication error
check
CRC 16 bits are used in two ways. (CRC: Cyclic Redundancy Check)
Correct Usage
• The communication range varies depending on the installation site environment. This is because a metal material and
the ground reflect a radio wave, and water and human body absorb it. Locate an antenna and tag in the communica-
tion range and check the radio wave environment in advance.
• The Read/Write antenna model V690-HMG01 has a communication test command to check the radio wave environ-
ment at a working site. (Refer to Section 3-5.)
[Tag Rotating angle: 0 degrees]
Antenna
Tag
* A hatched area on the tag shows a
2-5 Communication Performance