background image

 

 

Digital Indoor Antenna 

MODEL: 24702

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Thank you for purchasing this digital indoor antenna. 
Before your installation, please read this manual carefully and keep it for further information. 

 

INTRODUCTION 

 

The antennas used for digital terrestrial broadcasting can be easier and smaller. This indoor antenna 

(24702) is special designed for digital terrestrial broadcasting reception. The benefits of use this antenna 
are easy to install, light weight, compact size

etc. With state of the art low noise amplifier technology 

and circuitry, it will provide the best reception. And the compact and stylish housing design can be 
accompanied with your digital STB and TV. 

This digital indoor antenna (24702) is designed with 3 section foldable antenna panel. You can use 

the adjustable design to get the best signal reception. The digital antenna can be installed on a wall or be 
installed at the back of TV; just simply use the mounting kit.   

  

Feature: 

§

 

3 section foldable slim profile design indoor antenna   

§

 

Adjustable antenna mechanism for better reception adjustment 

§

 

34” telescopic antenna for VHF reception enhance 

§

 

Flexible installation methods with mounting kit: wall-mounted, TV back mounting 

§

 

VHF 47~230MHz 

§

 

UHF 470~870MHz 

§

 

Amp. Gain VHF: 21dB 

±

  3dB; UHF: 19 dB 

±

  3dB 

§

 

Low noise amplifier technology 

 

 

PACKAGE CONTENT   

  

Please check the contents before your installation.   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Main Unit 

Mounting 

Base 

Wall mounting kit 
(Screw X 2,   

Plastic pole X 2) 

Velcro

 

Power 

Adaptor 

Power 

Inserter 

Summary of Contents for 24702

Page 1: ...nied with your digital STB and TV This digital indoor antenna 24702 is designed with 3 section foldable antenna panel You can use the adjustable design to get the best signal reception The digital antenna can be installed on a wall or be installed at the back of TV just simply use the mounting kit Feature 3 section foldable slim profile design indoor antenna Adjustable antenna mechanism for better...

Page 2: ...out the power adaptor connect the barrel end to the DC input of power inserter AC end to the AC Outlet Please note use only supplied power adaptor Step 5 Turn on the STB and TV Step 6 Adjust the orientation of antenna to get the best signal reception If you are going to use the antenna with mounting base please follow the steps below Power Inserter Digital TV or STB Digital TV or STB Power Inserte...

Page 3: ...e the electric drill you should wear the eyes protection goggles and the drill bit must be fixed to avoid any injury Step 1 Take a electric drill use a drill bit to drill a 35mm deep hole Then clean the hole Step 2 Take out the plastic pole using hammer to ham it into the hole that made at step1 Step 3 Take out the screws use screw driver screw them through the mounting base onto the plastic pole ...

Page 4: ...l loss Avoid any interruption the reception will be better 3 Place the antenna near windows when use the antenna in indoor environment If the Windows screen is made of metal material it will become as a signal shielding Place the antenna away from those metal material windows screen TROUBLE SHOOTING 1 If you can not get the digital programs as you expect Please check following conditions a Check t...

Reviews: