![background image](http://html1.mh-extra.com/html/omron/v400-r1cf/v400-r1cf_user-manual_744093008.webp)
7
V400-R1CF/R1CS
User’s Manual
Int
rod
uct
ion
Introduction
Observe the following precautions to ensure safe use of the product.
1. Installation Environment
•
Do not use the product in environments containing flammable or explosive gases.
•
Do not use the product in environments containing corrosive or combustible gases.
•
Do not use the product in environments containing dust, salt, or metallic powders.
•
Do not use the product in environments containing droplets, water or mist, oil or
chemical agents.
•
Do not use the product in environments that may be affected by a CRT's flashing or
other ambient light.
•
Do not install or use the product outdoors.
•
For the purpose of ensuring safe operation and maintenance, do not install the
product close to high-voltage devices or electrically powered devices.
2. Power Supply and Wiring
•
To assure noise and insulation resistance, be sure to use S8VS-01505 (made by
OMRON) as a driving power supply.
•
Do not connect a voltage or AC power supply that has a voltage exceeding the rating
voltage (5 V+/-10%).
•
Avoid reverse connection of power supply. Do not short circuit a load on OK/NG
output signal (open collector).
•
Avoid applying a load that exceeds the rating.
•
Be sure to turn the power OFF before connecting or disconnecting a cable.
Connecting or disconnecting a cable while the power is ON may cause failure.
•
Connect different cables from high-voltage or power cables to the product. If the
same cable or duct is used, electromagnetic induction may result, which may result in
malfunction or damage.
•
Tighten the fixing screws at the torque specified in this manual.
3. Communication with Upper Equipment
•
Check that the product has started up, and then start communication with upper
equipment.
•
Indefinite signals may be generated from the upper interface while the product starts
up. Clear the receive buffer of the devices before starting initial operation.
Precautions for Safe Use
Содержание V400-R1CF
