Omron V400-R1CF, Руководство пользователя

Страница: 23 / 117

22
Section
2
Intro
duction Flow Chart
V400-R1CF/R1CS
User’s Manual
Section 2
Introduction Procedure
Introduction Flow Chart
A flow chart of preliminary examination, installation, and introduction of the product is as
shown below.
Preparation
Preliminary
examination
Check the type, width, height, and the number of digits of 2D codes
and bar codes.
p.24 Supported code list
p.26 Reading range performance
p.27 Reading angle performance
Wiring and
connection
Complete wiring.
p.29 Pin arrangement and input/output circuit
Connect peripheral equipment.
p.31 Example of connection with a PC
p.32 Example of connection with programmable controller (CS1)
Turn on the power switch.
Press the SCAN button to check whether
the code is read.
p.35 Testing
p.36 Investigation into the reading timing
p.44 Basic operation flow chart
Set the reading condition corresponding to the purpose.
p.37 Setting the reading conditions
p.56 Menu Sheet/Command List
Investigate the reading timing.