Examples and tips
PROGRAMMING MANUAL
334
R
e
vi
si
o
n
1
.0
'Wait until the feed movement has finished
WAIT IDLE
GOTO loop
5.2.7
CAM table inside a program
It shows how to create a CAM table inside a program, and use the
CAMBOX
motion command.
The profile used is the COS square one. This is a quite typical profile for
feeder-type applications as:
•
The motion provides a smooth acceleration without sudden acceleration
changes, so the material slip is minimized
•
It gives a fast deceleration so the cycle time is reduced. During
deceleration there is no material slip and the friction helps to the stop to
zero.