![background image](http://html1.mh-extra.com/html/omron/nyb17-100-series/nyb17-100-series_user-manual_743138134.webp)
Power Connector Wiring Procedure
Use the following procedure to wire the power connector.
1
Remove the sheath from the power supply wires.
7 mm
Precautions for Safe Use
Observe the following precautions to prevent broken wires.
• When you remove the sheath, be careful not to damage the conductor.
• Connect the conductor without twisting the wires.
• Do not weld the conductors. Doing so may cause the wires to break with vibration.
2
Insert a screwdriver in the small opening above the cable opening
1
to unlock the cable entry
and then push the wire all the way to the back of the cable opening
2
.
2
1
1
2
Pin
Description
1
24 VDC
2
0 VDC
3
Remove the screwdriver.
Do not apply stress to the cable after you have connected the wires.
5 Installation
5 - 38
NY-series Industrial Box PC Without Operating System User's Manual (W586)
Содержание NYB17-*100 SERIES
