Omron NYB17-*100 SERIES, Руководство пользователя

Страница: 91 / 194

4-2-7
RS-232C Connector Specifications
The optional RS-232C interface on the Box PC uses a standard SUBD9 connector.
The RS-232C interface is not isolated from the internal Box PC's components.
Additional Information
• Refer to 5-4-2 Ground on page 5 - 29 for grounding details.
• Refer to A-3 RS-232C Connector Pin Details on page A - 14 for pin details.
4-2-8
NY Monitor Link Connector Specifications
The NY Monitor Link connector connects an OMRON Industrial Monitor with an OMRON Industrial PC
that has an NY monitor link connector.
The NY Monitor Link communication is a combination of video and USB information.
Item Specifications
Connector type RJ45
Transmission media Twisted pair cable of category 6A or higher (double-shielded
straight cable with copper braiding and aluminum foil)
Maximum cable length between Industrial PC
and Industrial Monitor 100 m
Topology
Line (direct) connection only
*1
Video resolution 1.280 x 800 pixels at 60 Hz
Data throughput rate 280 Mbps max.
*1. Use a direct connection between the OMRON Industrial PC and the OMRON Industrial Monitor.
Do not use:
•
Ethernet switches
•
Ethernet hubs
•
Daisy chain connections
The NY Monitor Link connector locks automatically to prevent unintentional disconnection.
4 Specifications
4 - 23
NY-series Industrial Box PC Without Operating System User's Manual (W586)
4-2 Connector Specifications
4
4-2-7 RS-232C Connector Specifications