Omron NYB17-*100 SERIES, Руководство пользователя

Страница: 149 / 194

IPC Product
Input
24 VDC Power Supply (S8VK)
AC (L)
AC (N)
24 VDC
0 VDC
UPS (S8BA)
BU
BS
COM
Contact I/O
6
5
2
1
24 VDC
0 VDC
Output
4
6
1
UPS Mode Input
UPS Mode Input
Power Status Output
Power Status Output
Refer to the UPS S8BA User's Manual (Cat. No. U702) for details.
Refer to 5-4-3 Wire the Power Connector on page 5 - 36 for Power Connector details.
Refer to 5-4-4 Wire the I/O Connector on page 5 - 39 for I/O Connector details.
4
Power ON the Box PC.
5
Configure the UPS.
(1) Connect the USB cable supplied with the UPS to the USB connector of the UPS and to the
USB connector of the Box PC.
(2) Configure the UPS using the UPS Settings Utility.
(3) Remove the USB cable between the UPS and the Box PC.
6
Configure the Box PC to auto-start after power loss within the BIOS settings.
• Refer to
A-1-1 BIOS Overview on page A - 2 for details on BIOS changes.
• Refer to A-1-5 BIOS - Boot on page A - 9 for power loss BIOS details.
7
Create a software program that monitors the UPS Mode Input and initiates Power OFF of the
Box PC when the UPS Mode Input becomes active.
Use the Industrial PC System API to obtain the UPS Mode Input status.
Refer to NY-series Software Development Kit User's Manual for Industrial PC System API de-
tails.
8
Install the created software program.
9
Test the created software program and ensure it functions correctly.
10
Simulate a power interruption and confirm a correct shutdown of the Box PC.
• Start the Box PC
• Start applications
• Create a power interruption
• Monitor the shutdown sequence and confirm a correct shutdown sequence
The UPS is connected and configured.
The Box PC will shut down properly in case of a power supply interruption and restart automatically
when the power is restored.
5 Installation
5 - 53
NY-series Industrial Box PC Without Operating System User's Manual (W586)
5-8 Connect UPS
5
5-8-2 Connect UPS Using the I/O Connector