Omron NT20M series, Руководство по эксплуатации

Страница: 49 / 86

44
4-10-7 Terminal Function
This function allows you the option of displaying, by transmission on com-
mand, the codes (coordinates, type, etc.) of characters and figures you want
to display from the host, in addition to screens registered in advance. This
function is possible only when the Host Interface Unit is the NT600M-LK201
(RS-232C specifications) or the NT600M-LK202 (RS-422 specifications). For
details, refer to the terminal commands listed in the Host Interface Unit Oper-
ation Manual.
Item Content
Display position Optional
Character size Normal, half-size, high, wide, 4x, 9x, or 16x
Display attributes Normal, inverse, blinking, inverse blinking
Character designation ASCII
Graphics Polyline, circle
Note 1. If a displayed character string exceeds the line, that string is displayed
beginning from the left side of the next line.
2. In addition, strings that do not fit at the bottom of the screen over-write
from the top left side of the same screen.
Special Controls
Section 4-10