Omron NT20M series, Руководство по эксплуатации

Страница: 26 / 86

19
DN131), however, the panel should only be from 1.6 to 2.0 mm thick, in
order to allow enough space to replace the backlight.
Side Space for Backlight Replacement:
When mounting the NT20M to a panel, leave open the space marked
with dotted lines on the left of the rear panel as shown below.
175 mm min.
20 mm min.
NT2000M PTs have the backlight replaced from the back, so they need
not be accessed from the side. All dimensions shown below are in milli-
meters.
NT20M-D
j
121-V2 NT20M-DN121-V2 with NT20M-FK210
NT20M-D
j
131 NT20M-DN131 with NT20M-FK210
Installation
space
98.5
+0.5 –0
209
±
0.5
Installation
space
209
±
0.5
153 0.5
+
NT2000M-DN131
Installation
space
219
+0.5
–0
351
+0.5
–0
2. Insert the Terminal into the hole from the front of the panel.
NT20M NT2000M
Installing in a Panel
Section 2-4