![background image](http://html1.mh-extra.com/html/omron/nt20m-series/nt20m-series_operation-manual_743774038.webp)
32
Error Messages
When there is an error in screen data registered in the PT, the System Menu
will appear before entering RUN Mode, and the error message will be dis-
played on the bottom line.
Transmit Mode
Maintenance Mode
System Menu
Quit
Screen Data Corrupted
Example of error message
There are three types of error messages, as shown below. Operation will not
begin again until the error has been corrected.
Error message
Error Content and Correction
Screen Data Corrupted
This is displayed when registered screen data is corrupted. Initialize the screen data and
re-register the screen data. Operation will not begin again until the data is restored.
Mark Data Corrupted
This is displayed when registered mark data is corrupted. Initialize the screen data and
transfer the screen data files. The mark data is included in the screen data files. Re-register
the mark data. Operation will not begin again until the data is restored.
Memory Not Formatted
This is displayed when the screen data area is not formatted. Initialize the screen data
memory. All registered screen data, mark data, and system data will be deleted by the
initialization, so they will have to be transferred again from the Support Tool. In addition, if
the image data memory is the IC socket type, recheck the socket memory and its settings.
3-3
Transferring Data to and from the Support Tool
The following data can be transferred between the PT and the Support Tool.
Data
Support Tool to PT
PT to Support Tool
Screen data
All screens or one screen
All screens or one screen
Text string table
YES
YES
Numeral table
YES
YES
Mark data
YES
YES
Display history data
None
YES
System Memory* (Initial
screen after power-up)
YES
YES
Note System Memory is the first (initial) screen after the PT is powered up.
Procedure
Use the following procedure to transfer data.
1, 2, 3... 1.
Connect the PT and personal computer running the Support Tool.
2.
Select Transmit Mode from the System Menu.
System Menu
Select “Transmit Mode.”
Refer to Section 6 System Menu.
Transferring Data to and from the Support Tool
Section 3-3
- - - - - - - - - - - - - - -
Содержание NT20M series
Страница 1: ...Cat No V001 E1 2 Programmable Terminal NT20M NT2000M...
Страница 2: ...NT20M NT2000M Programmable Terminal Operation Manual Revised September 1993...
Страница 3: ...iv...
Страница 5: ...vi...