Omron MicroHAWK, Руководство по интеграции

Страница: 235 / 378

MicroHAWK Engine Integration Guide
8-47
I/O Parameters
Image Push to Host Detailed Setup
Image Storage Location
FTP Host Info
Definition: Defines where the saved image is going to be stored.
Note: When saving images to RAM , the system is limited to the actual RAM
space available in the system. The number of images that can be saved
depends on the Max RAM Drive Size . The actual system path is /imagesd0/
Images/ . When saving images to FTP , the path is <last 6 digits of device’s
MAC Address>_Images/ on the host FTP director. Note that the FTP server
needs to grant the user with create directory rights as the system will need to
create a directory on the FTP server to store all uploaded images.
File save scheme: The image file will be posted with its system reset
count, followed by its read cycle i.d., followed by its image i.d., followed by
its stored image type defined in <K763> , as follows:
<last 6 digits of device’s MAC Address>_<system total reset count>_<read
cycle id>_<image id>_<save image type>.{png, jpg}
<last 6 digits of device’s MAC Address>_<system total reset count>_<read
cycle id>_<image id>_readreport.xml
Serial Cmd: < K764, image storage location ,FTP host info,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit >
Default: RAM
Options: 0 = RAM
1 = FTP
Definition: mscan|pass@192.168.188.1:21 signifies a the user with mscan at
192.168.188.1 FTP server on port 21 with pass as the FTP login password.
Note: If port is not defined with the FTP server address, it will default to port 21.
Serial Cmd: < K764, image storage location, FTP host info ,transfer optimization,RAM
drive size in MB,save image until,action at image storage limit >
Default: “user|pass@xxx.xxx.xxx.xxx:21”
Options: Maximum 255 characters including the characters “ | ”, “ @ ”, and “ : ”.