Regular Payload Series-Hardware Installation Manual TM5 Series
9
2.3 Safety Precautions
DANGER:
This product can cause serious injury or death, or damage to itself and other equipment, if the
following safety precautions are not observed.
All personnel who install, operate, teach, program, or maintain the system must read the “Hardware
installation Manual”, “Software Manual”, and “Safety Manual” according to the software and hardware
version of this product, and complete a training course for their responsibilities in regard to the robot.
All personnel who design the robot system must read the “Hardware installation Manual”, “Software Manual”,
and “Safety Manual” according to the software and hardware version of this product, and must comply with
all local and national safety regulations for the location in which the robot is installed.
The TM Robot shall be used according to its intended use.
Results of the risk assessment may require the use of additional risk reduction measures.
If any local or national electrical regulation requires, power to the robot and its power supply must be locked
out and tagged out or have means to control hazardous energy or implement energy isolation before any
maintenance is performed.
Dispose of the product in accordance with the relevant rules and regulations of the country or area
where the product is used.
2.4 Validation and Liability
The information contained herein neither includes how to design, install, and operate a complete robotic arm
system, nor involves the peripherals which may affect the safety of the complete system. The integrators of the
robot should understand the safety laws and regulations in their countries and prevent major hazards from
occurring in the complete system.
This includes but is not limited to:
Risk assessment of the whole system
Adding other machines and additional safety mechanisms based on the results of the risk assessment
Building appropriate safety mechanisms in the software
Read Manual and Impact Warning Labels
