Regular Payload Series-Hardware Installation Manual TM5 Series
34
4.3 Operating Position of TM Robot with AGV
When TM Robot is placed on an AGV and while the AGV is in operation, the user should pause the TM Robot and
the TM Robot itself should not exceed the footprint of the AGV.
CAUTION:
The robot stick is magnetic so that it can be attached to iron or steel surfaces. However, the risk
of falling or rotating caused by poor attachment should be taken into account. It is
recommended using the Robot Stick Stand (official accessory) to secure the robot stick. The
Robot Stick Stand should be fix with screws. Always attach the robot stick when it is not in use.
The robot stick should be placed in a way such that the signal cables are routed to avoid
damage caused by pulling.
DANGER:
1. The control box, cables, power signal cables, and robot stick cannot be used when any of
them is in contact with liquids. This may result in personal injury or death.
2. The control box has an IP32 rating but should still is not recommended to be used in dusty
and humid environments. Particular attention should be paid to environments with conductive
dust (such as metal particles).
3. Be noted that the control box can only be at standing pose to have IP32 rating.
AGV Footprint
Top view of TM Robot placed on the AGV
