manualshive.com logo in svg

Omron JX-A4004, Руководство пользователя, Страница: 99 / 220

Поделиться
Скачать
Omron JX-A4004 Скачать руководство пользователя страница 99

4-21

4-2 Function Mode

4

Functions

•You can set both upper/lower limits to the set frequency. This function does not accept any 

frequency reference beyond the set limits.

•Set the upper limit first.

Make sure the upper limit (A061/A261) is higher than the lower limit (A062/A262).

•Neither limit would work if set to 0 Hz.

If the lower limit is set, the set value is prioritized even if 0 V (4 mA) is input for frequency reference.

Frequency Jump Function

This function helps avoid resonant points of loaded machines.

•The output frequency cannot be set within the frequency range set in the frequency jump function.
•The output frequency only pass through the jump frequency during acceleration and deceleration 

process, but if the frequency reference is set inside this area the output will move automatically out 
of this jump area setting a higher or lower frequency depending if inverter is accelerating or 
decelerating.

f

Set frequency (Hz)

Max. frequency

A004/A204

A061

A062

0V

4mA

10V

20mA

Frequency
reference

Parameter No.

Function name

Data

Default setting

Unit

A063
A065
A067

Jump frequency 1
Jump frequency 2
Jump frequency 3

0.0 to 400.0

0.0

Hz

A064
A066
A068

Jump frequency width 1
Jump frequency width 2
Jump frequency width 3

0.0 to 10.0

0.5

Related parameters

C001 to C005

Output
frequency

A067

A065

A063

A068

A068

A066

A064

A066

A064

Frequency
reference

Содержание JX-A4004





























































































































































































































Отзывы:

Нет отзывов