manualshive.com logo in svg

Omron JX-A4004, Руководство пользователя, Страница: 7 / 220

Поделиться
Скачать
Omron JX-A4004 Скачать руководство пользователя страница 7

5

Safety Precautions

Safety Precautions

„

Indications and Meanings of Safety Information

In this user's manual, the following precautions and signal words are used to provide information to 
ensure the safe use of the JX Inverter.
The information provided here is vital to safety. Strictly observe the precautions provided.

„

Meanings of Signal Words

„

Alert Symbols in This Document

„

Indicates an imminently hazardous situation which, if not avoided, 
is likely to result in serious injury or may result in death. Additionally 
there may be severe property damage.

Indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury or in property damage.

WARNING

CAUTION

Turn off the power supply and implement wiring correctly. Not doing so may result in a serious injury 
due to an electric shock.

Wiring work must be carried out only by qualified personnel. Not doing so may result in a serious 
injury due to an electric shock.

Be sure to ground the unit. Not doing so may result in a serious injury due to an electric shock or 
fire.
(200-V class: type-D grounding, 400-V class: type-C grounding)

Do not remove the front cover during the power supply and 5 minutes after the power shutoff. Doing 
so may result in a serious injury due to an electric shock.

Do not operate the Digital Operator or switches with wet hands. Doing so may result in a serious 
injury due to an electric shock.

Inspection of the Inverter must be conducted after the power supply has been turned off. Not doing 
so may result in a serious injury due to an electric shock.
The main power supply is not necessarily shut off even if the emergency shutoff function is 
activated.

Do not change wiring, mode change switches (S7, S8), optional devices or replace cooling fans 
while the input power is being supplied.
Doing so may result in a serious injury due to an electric shock.

WARNING

Содержание JX-A4004





























































































































































































































Отзывы:

Нет отзывов