27
Cause
Correction
* If measuring cannot be performed normally after the above has been done. Please consult OMRON
authorized dealer.
* Although it is seldom seen, human physique difference might lead to incapability of measuring. In this case,
consult OMRON authorized dealer.
* If fault occurs or the unit is repaired, all personal data will be lost.
Problem
Error Displays
■
Troubleshooting
When weight measuring is
completed, body composition can
not be measured
No personal data or guest data is
set (no "Personal Profile Number"
or "G" appears on the display
unit)
Please take a measurement after
setting personal data and guest data
(
Page 12)
There is no operation and the
power is turned off.
Please refer to "Automatic switch-off of the power"
(
Page 8
)
"Personal Profile Number" button
or "Guest" button is pressed
incorrectly (no "Personal Profile
Number" or "G" appears on the
display unit)
Please press "Personal Profile
Number" button or "Guest" button
before taking a measurement
(
Page 17)
No progress chart value
Measurement results of start date
or today are displayed as
"
"
It is the first measurement date
It is the reset start date
First date and reset start date cannot
be displayed
Starts to display from the second
day of the set start date
Under 9 years old
Unable to display the progress
charts of users under 9 years old
Out of measurement range
Unable to display progress chart out
of measurement range
Unable to set the start date of the
progress chart
Under 9 years old
Users under 9 years old cannot set
the start date
Cord cannot be wound
automatically
Cord is tangled.
Please pull out the cord and rewind.
(
Page 8
)
Not immediately set right after
completion of the measurement
Please set the start date
Immediately after completion of the
measurement
After the set of personal data and
guest data, "0.0 kg" will not be
displayed
More than 2 kg of weight is
increased when setting personal
data and guest's data
Please reconnect the power supply
For measurer with a personal number:
press "No." button to measure
For measurer as a guest: please
take out the display unit to set and
measure
(
Page 16)
Unable to use progress chart when
using the "Guest" mode
Use the "Guest" mode