21
Changes in subcutaneous fat percentage and skeletal muscle percentage of all parts
from the start date will be displayed by "good" (2 stages), "no change" and "caution".
* For progress chart, please refer to the Appendix. (
Page 29)
Reset the start date
If you want to reset the start date, please follow the following steps.
Only the date of data just measured can be set as the start date. (Date of previous data cannot be set as start date)
If multiple measurements are made on the start date, the last measurement
results made on the day will be taken as the measurement results of the start
date. The reference value will be displayed on the second day of setting.
What is start date?
Example:Indication of all
parts
WHOLE BODY = good
ARMS = no change
TRUNK = good
LEGS = good
When after a measurement or viewing the memory, press
button
Press again to back to the previous display.
■
Switch the display of body composition and segmental part...
(
Step 5 on Page 20)
Confirm measurement results of the start date
Measure weight and body composition
1
Press
button for more than 2 seconds
"SET" and "BACK" will flash.
Start date set in the past will be displayed.
2
Press
button, select "SET", and press
button
The reset start date (today's date) will flash.
If you want to stop changing, select "BACK", and press
button.
3
Then press
button
The start date will be changed and the power will be cut off.
4
What is progress chart?
Progress Chart
A past measurement date can be set as the start date of weight reduction. Users over 10 years old
can set start date.
■
During the initial use…the initial measurement date will be automatically set as the start date (start date
of weight reduction), and the measurement results will be set as the measurement results of the start date.
