Omron G3PW, Руководство пользователя

Страница: 57 / 120

42
Procedures for Operation and Setting Parameters Section 4-5
Setting Parameters in the Initial Setting Level
1,2,3... 1. Press the UP and DOWN Keys to select the parameter that is to be set
from External Duty Input Enable/Disable parameter [P01] to Initialize Set
Values parameter [P28].
2. Press the ENT/RST Key to display the parameter set values.
3. Use the UP and DOWN Keys to change a set value. When the UP or
DOWN Key is pressed, the display will start flashing.
4. Press the ENT/RST Key to enter the setting and return to the previous pa-
rameter (External Duty Input Enable/Disable parameter [P01] to Initialize
Set Values parameter [P28]).
1 0 p
0
1
0
2
1 p
0
2
t
b a
8 2 p
i n i
(Press the DOWN Key 11 times.)
The set value will be displayed.
(Press the DOWN Key 16 times.)
ADJ SET EV
ADJ SET EV
ADJ SET EV
ADJ SET EV
ADJ SET EV
ADJ SET EV
ADJ SET EV
ADJ SET EV
ADJ SET EV
Press the ENT/RST Key to
enter the set value and to return
to the previous display.
The set value is changed by
pressing the UP and DOWN
Keys. The display will flash.
Press the ENT/RST Key to
enter the set value and return to
the previous display.
The set value is incremented or decremented by
pressing the UP or DOWN Key. Holding down
the key changes the set value more quickly.
Press the ENT/RST Key to initialize
the setting and return to the
previous display.
When the UP Key is pressed, the INI
(initialization) display will flash.
ENT
RST
ENT
RST
ENT
RST
ENT
RST
ENT
RST
ENT
RST