2
Slim Relay
G2RV
Specifications
■
Input Ratings
■
Contact Ratings
Note:
P level:
λ
60
= 0.1 x 10
-6
/operation
■
Characteristics
Note:
Values in the above table are the initial values.
Rated voltage
Rated current
*1
Must operate
voltage
Must release
voltage
Power consumption
Input voltage
AC
DC
% of rated voltage
AC (VA)
Approx.
DC (mW)
Approx.
% of rated voltage
50 Hz
60 Hz
12 VDC
---
---
27.2 mA
80%
10%
---
300 mW
±
10%
24 VDC
---
---
13.3 mA
---
300 mW
24 VAC/DC
21.1 mA
22.5 mA
13.0 mA
0.5 VA
300 mW
48 VAC/DC
8.5 mA
9.0 mA
5.2 mA
0.4 VA
250 mW
110 VAC
7.1 mA
7.5 mA
---
0.8 VA
---
230 VAC
7.3 mA
7.9 mA
---
1.7 VA
---
*1) Rated currents are measured at 23 degrees Celsius (ambient)
Number of poles
1 pole
Load
Resistive load
(cos
φ
= 1)
Inductive load
(cos
φ
= 0.4, L/R = 7 ms)
Rated load
6 A at 250 VAC;
6 A at 30 VDC
2.5 A at 250 VAC;
2 A at 30 VDC
Rated carry current
6 A
Max. switching voltage
400 VAC, 125 VDC
Max. switching current
6 A
Max. switching power
1,500 VA
180 W
500 VA
60 W
Failure rate (reference value)
10mA at 5VDC (P level)
Item
1 pole
Contact resistance
100 m
Ω
max.
Operate (set) time
20 ms max.
Release time
40 ms max.
Max. operating frequency
Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance
1,000 M
Ω
min. (at 500 VDC)
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between coil and contacts*;
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Vibration resistance
Destruction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)
Shock resistance
Destruction: 1,000 m/s
2
Malfunction: 200 m/s
2
when energized; 100 m/s
2
when not energized
Endurance
Mechanical: 5,000,000 operations min.
Electrical : 100,000 Typical; NO 70,000 operations min. ; NC 50,000 operations min.
Ambient temperature
Operating: –40
°
C to 55
°
C (with no icing or condensation)
Ambient humidity
Operating: 5% to 85%
Weight
Approx. 35 g
Overvoltage category
III
Pollution degree
2
Contact material
AgSnIn
Creepage distance
7.0 mm
Clearance distance
5.5 mm